How to choose the vertical manual machine cutters?

KEYCUT key machine end mills are available in several distinctive product lines.
Designed to meet the diverse needs of locksmiths, they are available for you to choose from.


Laser Cutters

  • Single flute

Single edge design, strong resistance to breakage, half edge & triangular protection belt design, more robust, moderate cutting speed, suitable for less experienced locksmiths or customers with strong machine jitter.
More suitable for machines with slow speed and ordinary precision.

  • Two flutes

No chipping under high speed rotation, sharper than 1-flute milling cutter, more resistant to breakage than 3-flute milling cutter, faster chip removal.
Suitable for a wide range of locksmith and machines

  • Three flutes

Sharp and durable, spiral groove design, good chip removal, sharper.
It is more suitable for machines with speed over 5000 rpm and better precision, giving full play to the excellent performance of 3-flute milling cutter.

Dimple Cutters

  • Single edged

Semi-circular design, sharp edge, strong drilling force. Suitable for most kinds of copper key and iron key drilling.

  • Doube edged

Double-edged design, sharp and anti-breakage, smooth cutting keys.
Very wide applicability.

  • Double Side

Smooth, double-sided design, same as WENXING original dimple cutter, no need to get used to it, you can get started.

  • High Grade

Full drilling power without shocking, easy downward pressure to punch holes, low noise, flat bottom, no slipping, no need to shake.

  • Automatic machine dimple cutter

Specially designed for automatic key machines, mainly for hard material or coated key blanks, with strong drilling force.

 

Probe

  • HSS

Head chamfer design, accurate size and positioning.
Variety of specifications to choose from.

  • Carbide

Made of tungsten steel, low resistance without jamming, never rust, smooth transition, easy to turn, perfect solution to the risk of cutter breakage due to the jamming of the guide pin.

  • Automatic machine probe

Carbide material, rather break than bend, never rust.

 

  • Automatic machine non-magnetic probe

Aviation aluminum material, good toughness, non-magnetic, non-sticky chips.

Back to blog